DELTA®-QUICK STRIP
DELTA®-QUICK STRIP is specially designed to be an effective and economical improvement on traditional treated wood furring often used under exterior claddings. The product is easy to apply, provides excellent cavity drainage and ventilation, and does not suspend water or impede its flow.
DELTA®-QUICK STRIP is manufactured to provide the same necessary stand off as wood furring. It does not rot, warp, absorb or retain moisture, or impede the drainage of water. DELTA®-QUICK STRIP enhances air flow and may be used under many different cladding types.
DELTA®-QUICK STRIP is made from very durable HDPE. Its special dual-chamber 3 dimensional design provides a cost effective improvement on traditional treated wood furring. Unlike wood furring, DELTA®-QUICK STRIP does not retain moisture and actually enhances air flow.
DELTA®-QUICK STRIP is light weight and easy to handle. It cuts easily with a standard utility knife and attaches with standard fasteners and tools. DELTA®-QUICK STRIP comes in rolls 4” x 50’ and 5” x 50’ for rapid and efficient installation.
| Product name | DELTA®-QUICK STRIP | |
|---|---|---|
| Color | silver-grey | |
| Material | High-density polyethylene (HDPE), stabilized (oxidation & UV) | |
| Dimple height | apprx. 5/16" (8 mm) | |
| Material thickness | 0.022” (0.5 mm) | ASTM D1777-96 (2002) |
| Compressive Strength | 19.77 kPa (413 psf) @ 20% strain | ASTM C695-02a |
| Fire Resistance |
B2 |
DIN 4102 |
| Flame Spread |
245 |
ASTM E84-09 |
| Smoke Developed |
15 |
ASTM E84-09 |
| Water Penetration Resistance | 118 psi (813 kPa) Watertight |
AATCC 127-1995 |
|
Water Vapor Transmission |
22 ng/(Pa s m²) |
ASTM E96, Method A |
|
Vapor Permeance |
0.385 perms [grains/h/ft²/in Hg] |
ASTM E96, Method A |
|
Contact surface of rainscreen to WRB |
9% (91% open) | |
| Contact surface of rainscreen to cladding | 20% (80% open) | |
| Chemical properties | excellent chemical resistance, rot-proof | |
| Toxicity | non-toxic, non-polluting |
|
| Temperature range | -22°F to +176°F (-30°C to +80°C) | |
| Weight per unit area | approx. 1.56 oz/ft² (475 g/m²) | ASTM D5261-92 (2003) |
| Roll weight | approx. 1.5 lbs (0.7 kg) | |
| Roll length | 50 ft (15.24 m) | |
| Roll width | 4" or 5" (10 cm or 12.5 cm) | |
| Service life expectancy |
> 20 years (at pH between 4 and 9). The membrane should not be exposed to UV light for more than 30 days. |